20Kg/Carton,17Ton/20FCL,Outside carton lined with two layers of polyethylene bags, each containing 20 kg net weight.
RAL9016 powder coating metal electrostatic spray high reclaimed rate powder paints
RAL9016 powder coating Property:
Specific gravity : 1.1 - 1.5 (depend on colors)
Particle size distribution(Laser Particle size analyser) :Less than 5% above 100 um
50 – 65% above 32 um
Average particle size : 35- 45um
Gloss & Color range:
Gloss levels range from 50- 90% and above
A wide range colors are available ,certain color is subject to the technical approval .
This series is a thermoset powder coating based on saturated polyester resins specially selected for exterior use. It is formulated to give properties of good flow-out and satin or glossy finish. Its outstanding resistance to ultra-violet light and atmospheric aging make it highly decorative and durable in outdoor environment,It is widely used for outdoor furniture,architectural hardware,air-conditioners,bicycle frames,garage doors and signboards etc .
SORT BY CHEMISTRY:
Epoxy Powder Coating
Excellent Anti-Corrosion Excellent chemical resistance High mechanical performance Recommended for interior
Good chemical resistance Good mechanical property Excellent flexibility Recommended for interior
• Tough, durable, lasting coating for metals. Excellent hardness and abrasion / impact resistance gives improved product performance over most liquid coatings.
• Wide range of colors.
• Environmentally friendly outsourcing option to avoid permitting for solvent-based paints.
• Less process variation results in consistent color and appearance of the product.
• High film builds and excellent edge coverage gives better resistance to corrosion with proper pretreatment.
• Coatings can be easily formulated for specific applications such as prolonged exposure to sunlight, the ability to survive in highly corrosive environments, flexibility to allow forming after coating, or high durability and resistance to chipping.
Cold Rolled/Hot Rolled Steel
Aluminum Extrusions and Castings
Rare Earth Magnets (NdFeB)
NiZn Plated Steel
Powder Metallurgy Parts
We offer powder coating capabilities that include a wide spectrum of colors, thickness, textures, softness, edge coverages, flexibilities, machinabilities, smoothness and temperature ranges.
Powder Coating Suits Your Product:
"Environment Solution "
Excellent Impact and Mar Resistance
Colors, Textures, Gloss Level Option
Test standard and Method
GB/T 1732 -1993
GB/T 9286 - 1998
Salt spray resistance
Heat & humidity resistance
>500 Hours,film gloss slightly lose
Note: 1. Above test are using 0.30mm thickness degreased, rust removed cold rolling steel plate, film thickness is 60-80um.
2. Film performance may slightly decrease with gloss decrease.
The powder coating powder paints must be stored in ventilated, dry and clean room with temperature below 25oC, Keep it away from fire, heat,and direct sunlight. Outdoor stacking is prohibited. Avoid rains and exposure to sunshine during shipment.
Health and safety
The powder coating powder paints is no hazardous ingredients contained. Wearing anti-dust mask and goggles to avoid inhalation of dust. Try best to avoid longtime contact with powder. The coating adhesive to the skin can be washed with soap.