All powder coatings of the 02 series are TGIC-free pure polyester systems providing lasting weather resistance. Therefore, this powder coating with its universal quality, high scratch resistance and high elasticity is ideally suited for indoor and outdoor applications.
Colour shade: all RAL, RDS, NCS, Pantone, Munsell Finish: smooth, fine texture, rough texture, thin film, and effects Gloss: from flat to high gloss Density: ca. 1,5 g/cm3 , depending on colour shade and quality Spreading rate: depends on the applied film thickness, c.f. formula Storage life: average of 24 months
Erichsen cupping test: DIN EN ISO 1520, > 7 mm Mandrel bend test: DIN EN ISO 1519, good over 10 mm mandrel Salt spray test: DIN EN ISO 9227, > 240 hours without undercutting (corrosion creep) or blistering after appropriate pre-treatment Condensation water test: DIN EN ISO 6270-2, > 240 hours without undercutting (corrosion creep) or blistering after appropriate pre-treatment
Good regarding lye and acids – has to be tested individually
Finish: Aluminium, die-cast aluminium, steel – thorough degreasing required. To increase corrosion protection, a conversion layer is recommended. Application: all common processes (Tribo, Corona) Curing conditions: 10 minutes at 160 to 180 °C object temperature Overcoatability: can be overcoated with the same product or with special repair coatings.